Reply To: Dark Souls

#334120
Epitaph
  • Member
Offline
Replies: 3524
Been thanked: 8 times

Θενξ για τις απαντήσεις. Το FPS limit το ξεκλείδωσα μόλις τώρα και είχα σταθερά 60 FPS (με την έκδοση 2.4 του DSfix).

Oρίστε και μέρος του αρχείου (λιγότερα απ τα μισά άλλαξα)

###############################################################################
# Graphics Options
###############################################################################

# internal rendering resolution of the game
# higher values will decrease performance
renderWidth 1920
renderHeight 1080

# The display width/height
# 0 means use the same resolution as renderWidth/Height
# (use for downscaling – if in doubt, leave at 0)
presentWidth 0
presentHeight 0

############# Anti Aliasing

# AA toggle and quality setting
# 0 = off (best performance, worst IQ)
# 1 = low
# 2 = medium
# 3 = high
# 4 = ultra (worst performance, best IQ)
aaQuality 0

# AA type
# either “SMAA” or “FXAA”
aaType SMAA

############# Ambient Occlusion

# Enable and set the strength of the SSAO effect (all 3 settings have the same performance impact!)
# 0 = off
# 1 = low
# 2 = medium
# 3 = high
ssaoStrength 0

# Set SSAO scale
# 1 = high quality (default)
# 2 = lower quality, lower impact on performance
# 3 = lowest quality, lowest impact on performance
ssaoScale 3

# Determine the type of AO used
# “VSSAO” = Volumetric SSAO (default, only option pre-1.9)
# “HBAO” = Horizon-Based Ambient Occlusion
# “SCAO” = VSSAO + HBAO
# “VSSAO2” = Volumetric SSAO with more samples (tweaked by Asmodean)
# VSSAO and HBAO types have a slightly different effect. and similar performance
# SCAO combines both, with a higher performance impact
# VSSAO2 is generally more accurate, but also requires more performance
ssaoType VSSAO

############# Depth of field

# Depth of Field resolution override, possible values:
# 0 = no change from default (DoF pyramid starts at 512×360)
# 540 = DoF pyramid starts at 960×540
# 810 = DoF pyramid starts at 1440×810
# 1080 = DoF pyramid starts at 1920×1080
# 2160 = DoF pyramid starts at 3840×2160
# higher values will decrease performance
# do NOT set this to the same value as your vertical rendering resolution!
dofOverrideResolution 540

# Depth of Field scaling override (NOT RECOMMENDED)
# 0 = DoF scaling enabled (default, recommended)
# 1 = DoF scaling disabled (sharper, worse performance, not as originally intended)
disableDofScaling 0

# Depth of field additional blur
# allows you to use high DoF resolutions and still get the originally intended effect
# suggested values:
# o (off) at default DoF resolution
# 0 or 1 at 540 DoF resolution
# 1 or 2 above that
# 3 or 4 at 2160 DoF resolution (if you’re running a 680+)
dofBlurAmount o

############# Framerate

# Enable variable framerate (up to 60)
# NOTE:
# – this requires in-memory modification of game code, and may get you banned from GFWL
# – there may be unintended side-effects in terms of gameplay
# – you need a very powerful system (especially CPU) in order to maintain 60 FPS
# – in some instances, collision detection may fail. Avoid sliding down ladders
# Use this at your own risk!
# 0 = no changes to game code
# 1 = unlock the frame rate
unlockFPS 1

# FPS limit, only used with unlocked framerate
# do not set this much higher than 60, this will lead to various issues with the engine
FPSlimit 60

# FPS threshold
# DSfix will dynamically disable AA if your framerate drops below this value
# and re-enable it once it has normalized (with a bit of hysteresis thresholding)
FPSthreshold 28

############# Filtering

# texture filtering override
# 0 = no change
# 1 = enable some bilinear filtering (use only if you need it!)
# 2 = full AF override (may degrade performance)
# if in doubt, leave this at 0
filteringOverride 0

###############################################################################
# HUD options
###############################################################################

# Enable HUD modifications
# 0 = off (default) – none of the options below will do anything!
# 1 = on
enableHudMod 0

# Remove the weapon icons from the HUD
# (you can see which weapons you have equipped from your character model)
enableMinimalHud 1

# Scale down HuD, examples:
# 1.0 = original scale
# 0.75 = 75% of the original size
hudScaleFactor 0.75

# Set opacity for different elements of the HUD
# 1.0 = fully opaque
# 0.0 = fully transparent
# Top left: health bars, stamina bar, humanity counter, status indicators
hudTopLeftOpacity 0.8f
# Bottom left: item indicators & counts
hudBottomLeftOpacity 0.75f
# Bottom right: soul count
hudBottomRightOpacity 0.5f

απο κει και πέρα με τον χειρισμό δεν έπαιξα. Θα τα δω αύριο μαζί με το inventory.

Πάντως ΕΛΕΟΣ. 4-5 ρυθμίσεις άλλαξα και από 30 FPS ΜΑΧ (με την ψυχή στο στόμα ακόμα και σε 1024×768 ανάλυση), πήγα 60 ΣΤΑΘΕΡΑ. Τραγικότατο port.

Close
Close