Σου δίνω όλο το κείμενο τότε
smartctl -a /dev/sda
smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.1.10-1.16-default] (SUSE RPM)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Blue Serial ATA
Device Model: WDC WD3200BEVT-22ZCT0
Serial Number: WD-WXF0A99P7681
LU WWN Device Id: 5 0014ee 20375eb73
Firmware Version: 11.01A11
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.5, 3.0 Gb/s
Local Time is: Tue Mar 19 08:17:11 2013 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 9960) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 118) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 198 198 051 Pre-fail Always - 23359
3 Spin_Up_Time 0x0027 184 183 021 Pre-fail Always - 1758
4 Start_Stop_Count 0x0032 096 096 000 Old_age Always - 4244
5 Reallocated_Sector_Ct 0x0033 186 186 140 Pre-fail Always - 111
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 7379
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3402
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 75
193 Load_Cycle_Count 0x0032 124 124 000 Old_age Always - 228553
194 Temperature_Celsius 0x0022 114 074 000 Old_age Always - 33
196 Reallocated_Event_Count 0x0032 184 184 000 Old_age Always - 16
197 Current_Pending_Sector 0x0032 198 198 000 Old_age Always - 112
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0009 100 253 051 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 22858 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 22858 occurred at disk power-on lifetime: 7374 hours (307 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 2c 7f e4 40 Error: WP at LBA = 0x00e47f2c = 14974764
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- --
<hr class="bbcode_rule" />
<hr class="bbcode_rule" />
61 08 10 e8 29 7c 01 00 03:46:29.525 WRITE FPDMA QUEUED
61 08 08 98 28 7a 01 00 03:46:29.524 WRITE FPDMA QUEUED
61 08 f0 68 3f 53 06 00 03:46:29.524 WRITE FPDMA QUEUED
61 08 c8 a8 b4 81 01 00 03:46:29.524 WRITE FPDMA QUEUED
61 08 b0 b8 29 7c 01 00 03:46:29.524 WRITE FPDMA QUEUED
Error 22857 occurred at disk power-on lifetime: 7374 hours (307 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 2c 7f e4 40 Error: UNC at LBA = 0x00e47f2c = 14974764
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- --
<hr class="bbcode_rule" />
<hr class="bbcode_rule" />
60 28 80 08 7f e4 24 00 03:46:25.969 READ FPDMA QUEUED
60 40 78 ba 80 91 12 00 03:46:25.969 READ FPDMA QUEUED
60 80 70 60 68 25 0e 00 03:46:25.969 READ FPDMA QUEUED
61 03 68 60 36 a3 09 00 03:46:25.969 WRITE FPDMA QUEUED
60 40 60 10 cb e8 01 00 03:46:25.969 READ FPDMA QUEUED
Error 22856 occurred at disk power-on lifetime: 7374 hours (307 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 2c 7f e4 40 Error: WP at LBA = 0x00e47f2c = 14974764
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- --
<hr class="bbcode_rule" />
<hr class="bbcode_rule" />
61 08 18 a0 28 7a 01 00 03:46:22.588 WRITE FPDMA QUEUED
61 08 10 b0 32 7b 01 00 03:46:22.588 WRITE FPDMA QUEUED
61 08 08 90 28 7a 01 00 03:46:22.587 WRITE FPDMA QUEUED
61 08 00 98 28 7a 01 00 03:46:22.587 WRITE FPDMA QUEUED
61 01 f8 c8 d8 ff 02 00 03:46:22.586 WRITE FPDMA QUEUED
Error 22855 occurred at disk power-on lifetime: 7374 hours (307 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 2c 7f e4 40 Error: UNC at LBA = 0x00e47f2c = 14974764
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- --
<hr class="bbcode_rule" />
<hr class="bbcode_rule" />
60 28 80 08 7f e4 24 00 03:46:19.106 READ FPDMA QUEUED
60 38 78 3a 80 91 12 00 03:46:19.105 READ FPDMA QUEUED
60 80 70 10 67 25 0e 00 03:46:19.105 READ FPDMA QUEUED
60 20 68 40 36 dd 01 00 03:46:19.105 READ FPDMA QUEUED
60 38 60 62 e0 86 01 00 03:46:19.105 READ FPDMA QUEUED
Error 22854 occurred at disk power-on lifetime: 7374 hours (307 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 2c 7f e4 40 Error: UNC at LBA = 0x00e47f2c = 14974764
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- --
<hr class="bbcode_rule" />
<hr class="bbcode_rule" />
60 08 40 0e 07 a7 01 00 03:46:15.868 READ FPDMA QUEUED
61 08 38 a0 28 7a 01 00 03:46:15.868 WRITE FPDMA QUEUED
60 1b 30 16 07 a7 01 00 03:46:15.868 READ FPDMA QUEUED
61 08 28 98 32 7b 01 00 03:46:15.867 WRITE FPDMA QUEUED
60 28 20 08 7f e4 24 00 03:46:15.867 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 60% 7378 31108065
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.